• Call our product specialists
    Parts Service Sales
  • Find a Dealer
  • View TYM Specials
  • Review us on Google
  •
  • Share

    •
    Inlon's network of dealers across Australia will provide you with quality new tractor sales and service. When QualiTYMatters, rely on TYM tractors.

    TYM Tractors

    T1003 Front End Loader


    TYM T1003 Front End Loader

    Photograph for illustration purposes - standard specifications may not match those shown.


    FEATURES OF THE TYM 'T1003' FRONT END LOADER

    CONSTRUCTION

    T1003 Front End Loader Level Lift
    • Loader is a mechanical level lift design
    • The arms are made from tappered segments providing maximum strength with optimal pin weight
    • Pins are plated and greasable

    T1003 Front End Loader Detach
    • The loader is quick-detach to the tractor via simple quick release pins
    • Integrated stand is provided for loader storage on hard surfaces

    T1003 Front End Loader Rail
    • The loader mounting frame is connected to the rear axle via a rail. This provides greater strength to the loader frame to avoid damage to the tractor when pushing heaped material

    FEATURES

    T1003 Front End Loader Level Indicator Gauge
    • Bucket level indicator
    • Easy visibility of indicator rod from drivers seat when bucket edge is parallel to the ground
    • Loader soft ride transport mode on linkage

    T1003 Front End Loader Grill Guard
    • Grille guard protection frame

    ATTACHMENT

    T1003 Front End Loader Implement Hitch
    • Implement attached to the loader is via a Euro-Hitch connection allowing easy attachment of other tools and implements to the loader
    • Easy connection and disconnection of attachments from the loader via a single lever

    T503 Front End Loader 4 in 1 Bucket
    • The loader is fitted standard with 4-in-1 bucket providing 4 implements in one: conventional bucket scoop; grab for carrying; and blade and back blade for leveling
    • The 4-in-1 bucket needs a third hydraulic function and this is standard on the loader controls

    CONTROLS

    T1003 Front End Loader Joystick
    • Loader is fitted with integrated joystick controls for the raise/lower and crowd/dump functions
    • The 4-in-1 bucket is controlled via a trigger button on the joystick to alleviate fatigue compared to thumb operated 3rd function style controls
    • Joystick has a safety lock to prevent inadvertant operation
    TYM Loader Specifications Diagram

    Specifications and design are subject to change without notice. These specifications are a general guide.

    SPECIFICATIONS

    		 T1003 4-in-1 Loader
    Loader model LT900
    Tractor models T1003
    A. Maximum lift height (mm) 3,430
    B. Clearance with attachment level (mm) 3,136
    C. Clearance with attachment dumped - 45 degrees (mm) 2,555
    D. Reach at maximum height - 45 degrees (mm) 843
    E. Maximum dump angle (degrees) 53
    F. Reach with attachment on ground (mm) 1,969
    G. Attachment rollback angle (degrees) 50
    H. Digging depth below grade (mm) 248
    J. Overall height in carry position (mm) 1,952
    L. Depth of attachment - to back of inner shell (mm) 675
    M. Height of attachment (mm) 643
    N. Depth of attachment - to pivot pin (mm) 942
    Lift capacity to full height of pivot pins (kg) 1,442
    Breakout force at ground level, pivot pins (kg) 2,274
    Rated operating load - counter weight on 3PL (kg)  

    Please note that Australian specifications may vary to those shown on the manufacturer's brochure and website.

    Disclaimer: Specifications and features described on the website are subject to change without notice. All care has been taken to present accurate information, however, the company is not liable for unintended errors or omissions.